Sinter Model 005 Avid

The Avid Juicy and BB7 calipers are the long-tail of Sinter's SRAM-side coverage: the Juicy 3 / 5 / 7 / Ultimate / Carbon hydraulic family from the late-2000s era, and the BB7 mechanical disc that's still on a meaningful share of cyclocross, gravel, and touring bikes built between 2005 and the present. The Sinter Model 005 is the organic-compound replacement for those calipers. One pad shape covers the cable-actuated BB7 and the hydraulic Juicy line because Avid kept the pocket geometry consistent across the platform.

What's in the kit

One caliper's worth of pads (2 pads, left and right), plus the spring that holds them in place against the Avid caliper body, and Sinter's bedding-in instructions. Order two kits if you're replacing front and rear pads in the same service.

Fits

Avid pad shape, covering the BB7 mechanical disc and the Juicy hydraulic family:

• Avid BB7 (mechanical disc, road and mountain variants)
• Avid Juicy 3
• Avid Juicy 5
• Avid Juicy 7
• Avid Juicy Ultimate
• Avid Juicy Carbon

The BB7 specifically is the cable-actuated disc that ships on a large catalog of cyclocross, gravel, and touring bikes still in active service; it's also the disc brake of choice on a fair number of bikepacking builds where cable simplicity beats hydraulic-line maintenance. The hydraulic Juicy line ran from about 2005 through the early Elixir era; replacement pads for those brakes are increasingly hard to source through OE channels.

Compound and feel

Sinter's organic ceramic-loaded compound brings the modulation that the Juicy hydraulic line was originally designed around. The BB7 mechanical disc benefits even more from the organic compound: cable-actuated brakes amplify any inconsistency in pad-rotor friction (because the lever can't sense pad position the way a hydraulic system can), so a pad with predictable bite and a wide working envelope makes the brake feel more refined than it usually does. For cyclocross and gravel riders running BB7s, this is the pad swap that meaningfully improves how the brake responds in the wet.

Specs

• Compound: organic (ceramic-loaded, resin-bound)
• Backing plate: steel
• Pad shape: Avid Juicy / BB7
• Pads per package: 2 (one caliper)
• Includes spring

Includes: 2 pads (left and right), spring, bedding-in instructions.

Made in Ljubljana, distributed by Euro Toolworks

Sinter has been making friction materials in Ljubljana since 1969, and developed the first disc brake pads in the former Yugoslavia in 1972. The plant supplies organic-compound pads to motorcycle OEMs alongside the bicycle aftermarket. Unior has been forging hand tools in Zreče since 1919, and is the official technical partner of multiple World Tour and downhill teams. Euro Toolworks is the importer behind both brands in North America. The Model 005 is the catalog's long-tail pad; the one that keeps a 2008 cyclocross BB7 or a 2010 trail-bike Juicy 7 working another season instead of replacing the whole brake system.

Pro tip from our mechanics

The BB7 specifically benefits from a careful cable-tension check after a pad swap: fresh pads change the cable-pull-to-pad-engagement geometry slightly, and the BB7's inboard and outboard caliper screws (the static pad and the cable-driven pad) want to be reset against the fresh pad surface, not the worn one they were last centered against. A few minutes with the barrel adjuster and the inboard hex screw after install pays back over the next few hundred miles.

Which compound suits your riding and which Sinter model fits your brake is covered in How to choose Sinter brake pads →.