Sinter Model 008 Avid, SRAM

The SRAM Guide and G2 calipers; the company's mid-tier-and-up four-piston MTB platform; share a pad pocket with the older Avid Trail series and with the current Level Stealth four-piston caliper. The Sinter Model 008 is the organic-compound replacement for that pocket. The same pad shape covers Guide R / RS / RSC / Ultimate, all current G2 variants, the Avid Trail 7 / 9 / Guide, and the Level Stealth four-piston.

What's in the kit

One caliper's worth of pads (2 pads, left and right) for the Guide / G2 / Trail / Level Stealth four-piston pocket. The kit ships with the spring, pin, and bedding-in instructions. Order two kits if you're replacing front and rear pads in the same service.

Fits

Guide / G2 / Trail / Level Stealth four-piston pad shape:

• SRAM Guide R
• SRAM Guide RS
• SRAM Guide RSC
• SRAM Guide Ultimate
• SRAM G2 (full range)
• SRAM Level Stealth 4 Piston
• Avid X0 Trail, Trail 7, Trail 9, Trail

The Guide and G2 are the platforms SRAM positions for enduro and aggressive trail MTB; the Sinter compound choice for this pad pocket is the same organic ceramic-loaded mix that handles the cumulative heat these four-piston calipers see on long descents.

Compound and feel

Sinter's organic compound earns its keep on four-piston SRAM calipers in the same way it does on four-piston Shimano calipers: enduro and trail riders work the brake at sustained moderate pressure on long descents, and organic-matrix modulation outperforms sintered-pad raw heat capacity in that pattern. The kevlar, ceramic, clay, and carbon fibers in the matrix hold a wider thermal range than a typical resin pad, so the Guide-and-G2 customer running a 200-mm front rotor on enduro terrain stays inside the compound's working envelope on descents that would put a less refined organic pad into early fade.

Specs

• Compound: organic (ceramic-loaded, resin-bound)
• Backing plate: steel
• Pad shape: SRAM Guide / G2 / Trail / Level Stealth four-piston
• Pads per package: 2 (one caliper)
• Includes spring and pin

Includes: 2 pads (left and right), spring, pin, bedding-in instructions.

From the Ljubljana bench

Sinter's bicycle line runs through the same Ljubljana plant that supplies organic-compound pads at scale to motorcycle OEMs. Unior has been forging hand tools in Zreče since 1919, and is the official technical partner of multiple World Tour and downhill teams. Euro Toolworks is the importer behind both Slovenian brands in North America. The Model 008 is one of the highest-volume four-piston pad shapes in the Sinter catalog because the SRAM Guide / G2 platform is on more aggressive trail and enduro bikes than any other current four-piston design, and that breadth-of-installed-base is what keeps the Model 008 at the top of the brake-pads collection's monthly orders.

Pro tip from our mechanics

The SRAM Guide and G2 four-piston caliper has a known retraction-spring behavior where the rear pad and front pad can wear at slightly different rates depending on how the spring seats against the new pad set. Install fresh Sinter pads with the spring properly seated (the spring's bent legs sit against the pad-back, not the pad's friction surface), and the wear pattern stays even through the pad's working life. If the spring goes in backwards (a common first-install mistake), the front pad will wear noticeably faster than the rear.

Which compound suits your riding and which Sinter model fits your brake is covered in How to choose Sinter brake pads →.