Sinter Model 036 Tektro

Tektro's two-piston cargo-bike caliper is the brake that's increasingly common on the new generation of electric cargo bikes; Riese & Müller, Tern, Urban Arrow, Yuba, and the OE platforms that sit behind a long list of last-mile delivery and family-cargo builds. The Sinter Model 036 is the organic-compound pad built specifically for cargo-bike braking on the Tektro 2-piston caliper.

What's in the kit

One caliper's worth of pads (2 pads, left and right) for the Tektro two-piston cargo pocket. The kit ships with bedding-in instructions. Order two kits if you're replacing front and rear pads on the same service.

Fits

Tektro 2-piston cargo-bike caliper:

• Tektro two-piston cargo-spec hydraulic calipers; the platform Tektro builds for electric cargo bike OE channels

Cargo bikes typically run 180 mm or 203 mm rotors paired with a higher-mass system (bike plus cargo plus rider), and the pad's working pattern is sustained moderate braking rather than short hard inputs. The Model 036 is designed for that load profile specifically.

Compound and feel

Sintered pads are the conventional answer for heavy-load braking, but cargo-bike use cases actually favor organic compound. Cargo riders work the brake with sustained moderate pressure on long downhill runs; the resin matrix modulates that pressure linearly, where a sintered pad's higher bite-onset force is harder to control under load. Sinter's organic ceramic-loaded compound stays inside its working envelope on the sustained-load pattern cargo-bike braking creates, bites predictably from the lever, and is kinder to the rotor than sintered alternatives.

Specs

• Compound: organic (ceramic-loaded, resin-bound)
• Backing plate: steel
• Pad shape: Tektro 2-piston cargo
• Pads per package: 2 (one caliper)
• Built specifically for cargo-bike applications

Includes: 2 pads (left and right), bedding-in instructions.

Sinter's Ljubljana plant, Unior's Zreče forge

Cargo bikes are one of the fastest-growing categories in the European bicycle market, and the Slovenian organic-compound supply chain has scaled with them. Sinter has been making friction materials in Ljubljana since 1969, and developed the first disc brake pads in the former Yugoslavia in 1972. Unior has been forging hand tools in Zreče since 1919, and is the official technical partner of multiple World Tour and downhill teams. The Model 036 is Sinter's commitment to the cargo-bike segment; a pad compound designed for sustained-load braking on a heavy bike, not a sintered pad scaled from a DH MTB platform.

Pro tip from our mechanics

Cargo bikes are often serviced less frequently than enthusiast bikes because the rider is a parent or delivery operator, not a wrench. A Sinter Model 036 pad swap is the right moment to also check the rotor wear, the caliper bleed status, and the rotor-bolt torque (the cargo-load environment loosens rotor bolts faster than enthusiast use does). Combined, those checks add fifteen minutes to a pad swap and prevent the most common “brake feels weak six months later” complaints from cargo-bike owners.

How to read the fitment table and choose the right compound for your riding is laid out in How to choose Sinter brake pads →.